Maskless photolithography using plasma displays

Patent Citations (37)

Non-Patent Literature (170)

• Singh-Gasson et al., “Maskless Fabrication of Light-Directed Oligonucleotide Microarrays Using a Digital Micromirror Array”, Nature Biotechnology, 1999, pp. 974-978, vol. 17.Applicant
• Gibbs, “New Chip Off the Old Block”, Scientific American, Sep. 1996, online document, 3 pages.Applicant
• Johnson, “Micromirror Arrays Perform Photolithography Step”, EETIMES, 1999, online document, 5 pages.Applicant
• Mendoza et al., “High-Throughput Microarray-Based Enzyme-Linked Immunosorbent Assay (ELISA)”, Biotechniques, 1999, online document, 1 page.Applicant
• Dobrowolski et al., “DNA Microarray Technology for Neonatal Screening”, Acta Paediatr Suppl, 1999, online document, 1 page.Applicant
• Nuwaysir et al., “Microarrays and Toxicology; the Advent of Toxicogenomics”, Mol Carcinog, 1999, online document, 1 page.Applicant
• Khan et al., “Expression Profiling in Cancer Using cDNA Microarrays”, Electrophoresis, 1999, online document, 1 page.Applicant
• Epstein et al., “Microarray Technology—Enhanced Versatility”; Persistent Challenge, 2000, online document, 1 page.Applicant
• Romero et al., “Reverse-Transcription Poylmerase Chain Reaction Detection of the Enteroviruses”, Arch Pathol Lab Med, 1999, online document, 1 page.Applicant
• Sellwood et al., “The Use of Reverse Transcriptase-Polymerase Chain Reaction to Investigate Environmental Samples for the Presence of Enteroviruses”, Commun Dis Public Health, 1998, online document, 1 page.Applicant
• Kurian et al., “DNA Chip Technology”, J Pathol, 1999, online document, 1 page.Applicant
• Tanaka et al., “High-Precision Binary Optical Element Fabricated by Novel Self-Aligned Process”, Japanese Journal of Applied Physics, 1999, pp 6976-80, vol. 38, No. 12B.Applicant
• Topper et al., “Low Cost Electroless Copper Metallization of BCB for High-Densisty Wiring Systems”, Proceedings International Symposium on Advanced Packaging Materials, 1999, pp 202-8.Applicant
• Lin et al., “An Improved Heterojunction-Emitter Bipolar Transistor Using Delta-Doped and Spacer Layers”, Materials Chemistry and Physics, 1999, pp 91-5, vol. 59, No. 1.Applicant
• Genolet et al., “Soft, Entirely Photoplastic Probes for Scanning Force Microscopy”, Review of Scientific Instruments, 1999, pp 2398-401, vol. 70, No. 5.Applicant
• Sthel et al., “Testing of Furfuryl Alchohol Resin as a Negative Photoresist”, Polymer Testing, 1999, pp 47-50.Applicant
• Karafyllidis et al., “Modelling and Simulation”, Microelectronic Engineering, 1999, pp 71-84, vol. 45, No. 1.Applicant
• Sekiguchi et al., “Influence of Underlayer Reflection on Optical Proximity Effects In Sub-Quarter Intron Lithography”, Proceedings of the SPIE—The International Society for Optical Engineering, 1998, pp 47-55 vol. 3334.Applicant
• Maeda et al., “ArF Chemically Amplified Negative Resist Using Alicyclic Epoxy Polymer”, Journal of Photopolymer Science and Technology, 1998, pp 507-12, vol. 11, No. 3.Applicant
• Kudo et al., “Optimization of DUV Negative Resists for 0.15 mu m Lithography”, Journal of Photopolymer Science and Technology, 1998, pp 445-54 vol. 11, No. 1.Applicant
• Wallraff et al., “Etch Selectivity of 4SiMA:hydroxystyrene based copolymers. Silicon Chemistry for Bilayer Resist Systems”, Journal of Photopolymer Science and Technology, 1998, pp 673-9, vol. 11, No. 4.Applicant
• Dabbagh et al., “Capabilities and Limitations of Plasma Polymerized Methylsilane (PPMS) All-Dry Lithography”, Journal of Photopolymer Science and Technology, 1998, pp 651-61, vol. 11, No. 4.Applicant
• Karafyllidis et al., “Negative Resist Profiles in 248 nm Photolithography: Experiment, Modelling and Simulation”, Semiconductor Science and Technology, 1998, pp 603-10, vol. 13, No. 6.Applicant
• Robertson et al., “New Patternable Dielectric and Optical Materials for MCM-L/D- and o/e MCM-Packaging”, Proceedings. The First IEEE International Symposium on Polymeric Electronics Packaging, 1997, pp 203-12.Applicant
• Hauouel et al., “Dependence of Developed Negative Resist Profiles on Exposure Energy Dose: Experiment, Modeling, and Simulation”, Microelectronics Engineering, 1998, pp 351-4, vol. 41-42.Applicant
• Suzuki et al., “Proposal of Coplanar-type High-T/sub c/ Superconducting Field-effect Devices”, Physica C, 1997, pp 2495-6, vol. 282-287.Applicant
• Inanami et al., “50 nm Pattern Etching of Si Wafer By Synchrotron Radiation Excited CF/sub 4/plasma”, Japanese Journal of Applied Physics, 1997, pp 7706-9, vol. 36, No. 12B.Applicant
• Yasuzato et al., “Optical Proximity Correction of Alternating Phase-Shift Masks for 0.18 mu m KrF Lithography”, Proceedings of the SPIE, 1997, pp 751-62, 3051.Applicant
• Op De Beeck et al., “NA/sigma Optimization Strategies for an Advanced DUV Stepper Applied to 0.25 mu m and sub-0.25 mu m Critical Levels”, 1997, pp 320-32, vol. 3051.Applicant
• Hulsmann et al., “Edge-Phase-Shifting Lithography for sub 0.3 mu m T-Gates” Proceedings of the SPIE, 1997, pp 295-303, vol. 3051.Applicant
• Jungchul et al., “Measuring Flare and its Effect on Process Latitude”, Proceedings of the SPIE, 1997, pp 708-13, vol. 3051.Applicant
• Guerin et al., “Simple and Low Cost Fabrication of Embedded Micro-Channels by Using a New Thick-Film Photoplastic”, Transducers 97, 1997, pp 1419-22, vol. 2.Applicant
• La Fontaine et al., “Characterization of SAL605 Negative Resist at Lambada=13nm”, OSA Trends in Optics and Photonics, 1996, pp 39-41, vol. 4.Applicant
• Cha-Won Koh et al., “Characterization of the Resist Pattern Collapse in a Chemically Amplified Resist”, Proceedings of the Microlithography Seminar INTERFACE '96, 1996, pp 295-302.Applicant
• Miller et al., “Getting the Most from I-Line Technology by Optimizing Numerical Aperture and Partial Coherence for Critical Layers”, Proceedings of the Microlithography Seminar INTERFACE '96, 1996, pp 269-78.Applicant
• Katsumata et al., “Chemically Amplified Resist Process for 0.25 mu m Generation Photomasks”, Proceedings of the SPIE, 1996, pp 83-91, vol. 2884.Applicant
• Lee-Soon Park et al., “Effect of Membrane Structure on the Performance of Field-Effect Transistor Potassium-Sensitive Sensor”, Sensors and Actuators, 1996, pp 239-43, vol. A57, No. 3.Applicant
• Katsumata et al., “A Chemically Amplified Resist Process for 0.25 mu m Generation Photomasks”, Proceedings of the SPIE, 1996, pp 96-104, vol. 2793.Applicant
• Wada et al., “New Concept for Negative Tone Electron Beam Resist”, Proceedings of SPIE, 1996, pp 70-7, vol. 2793.Applicant
• Flack et al., “An Investigation of the Properties of Photosensitive Polyimide Films”, Proceedings of the SPIE, 1995, pp 169-85, vol. 2726.Applicant
• Op De Beeck et al., “Optical Proximity Effects and Correction Strategies for Chemical Amplified DUV Resists”, Proceedings of the SPIE, 1996, pp 622-33, vol. 2726.Applicant
• Lin et al., “Water Soluble Resist for “Environmentally Friendly” Lithography”, Proceedings of the SPIE, 1996, pp 308-18, vol. 2725.Applicant
• Nicolau et al., “Application of DNQ-Based Microlithography to Patterning Bioactive Molecules and Cells” Proceedings of the SPIE, 1996, pp 500-11, vol. 2724.Applicant
• Gabor et al., “Block and Random Copolymer Resists Designed for 193 nm Lithography and Environmentally Friendly Supercritical CO/sub 2/Development”, Proceedings of the SPIE, 1996, pp. 410-17, vol. 2724.Applicant
• Huang et al., “A Negative Tone Resist System Using Vinyl Cyclic Acetal Crosslinker”, Proceedings of the SPIE, 1996, pp 315-22, vol. 2724.Applicant
• Mori et al., “Investigation of Substrate-Effect in Chemically Amplified Resist”, Proceedings of the SPIE, 1996, pp 131-8, vol. 2724.Applicant
• Vinet et al., “Undercut Elimination in DUV Negative Systems: Application to Lithography and Etching of Metal Levels”, Proceedings of the SPIE, 1996, pp 82-91, vol. 2724.Applicant
• Kawahito et al., “Micro-Fluxgate Magnetic Sensing Elements Based on Silicon Microtechnology”, Proceedings of the SPIE, 1996, pp 134-7.Applicant
• Larsen et al., “Design and Fabrication of Compliant Micromechanisms and Structures with Negative Poisson's Ratio”, Proceedings IEEE, The Ninth Annual International Workshop on Micro Electro Mechanical Systems, 1996, pp 365-71.Applicant
• Yan et al., “DUV Wafer Processes”, Proceedings of the SPIE, 1995, pp 158-66, vol. 2621.Applicant
• Suzuki et al., “Focused Ion Beam/Optical-Merged Lithographic Technique Using Ladder Silicone Spin-on Glass”, Journal of Vacuum Science & Technology B, 1995, pp 2593-6, vol. 13, No. 6.Applicant
• Arai et al., “Application of Chemically Amplified Resists on Photomask Fabrication”, Proceedings of the SPIE, 1995, pp 74-87, vol. 2512.Applicant
• Farrar et al., “0.35 Microgram DUV Lithography for Poly Gate Layer”, Proceedings of the SPIE, 1994, pp 321-31, vol. 2196.Applicant
• Pierre et al., “EDMES: an Expert System for Process Optimization in Micro-Lithography”, Proceedings of the SPIE, 1994, pp 267-77, vol. 2196.Applicant
• Op De Beeck et al., “Lithographic Strategies for 0.35 mu m Poly Gates for Random Logic Applications”, Proceedings of the SPIE, 1994, pp 407-21, vol. 2195.Applicant
• Goethals et al., “Proximity Effects in Dry Developed Lithography for Sub-0.35 mu m Application”, Proceedings of the SPIE, 1994, pp 395-406, vol. 2195.Applicant
• Nakano et al., “Transparent Photoacid Generator (ALS) for ArF Excimer Laser Lithography and Chemically Amplified Resist”, Proceedings of the SPIE, 1994, pp 194-204, vol. 2195.Applicant
• Drozdov et al., “Quantum Wires With Controllable Conducting-Channel Width Based on IN/sub 0.53/Ga/sub 0.47/As/InP Heterostructures”, Semiconductors, 1994, pp 183-7, vol. 28, No. 2.Applicant
• Tomo et al., “Process Issue Improvement of Surface Image Transfer Technique: Depth-of-Focus Characteristics and Their Comparison with Simulation Results”, Journal of Vacuum Science & Technology B, 1993, pp 2725-32, vol. 11, No. 6.Applicant
• Ren et al., “Fabrication of Y-Gate, Submicron GaAs Length Metal-Semiconductor Field Effect Transistors”, Journal of Vacuum Science & Technology B, 1993, pp 2603-6, vol. 11, No. 6.Applicant
• Martin et al., “Effects of Focused Ion Beam Reticle Repair on Optical Lithography at I-Line and Deep UltraViolet Wavelengths”, Journal of Vacuum Science & Technology B, 1993, pp 427-31.Applicant
• Leming Shi, “Microarray (Genome Chip)”, website-www.GeneChips.com, 2002, 21 pages.Applicant
• Dietz et al., “The Process of Dry Film Lamination YPCB Manufacture”, Printed Circuit Fabrication, 1999, pp 42-5 vol. 22, No. 9.Applicant
• Waldner, “Registration Concepts for Today's Multilayers YPCB Manufacture”, Proceedings of the EPC, 1998, pp1-14.Applicant
• Hoffman, “Photosensitive Dielectrics for New SBU-Technology YPCB Manufacture”, Proceedings of the EPC, 1998, pp 1-10.Applicant
• Hertlein, “Performance and Limits of Photolithographic Technology: PCB Manufacturing Technology Following Microelectronics Production Technologies”, Proceedings of the EPC, 1998, pp 1-7.Applicant
• Blake, “How Will Direct Imaging Affect AOI? YPCB Manufacture”, CircuiTree, 1999, pp 162,4,6 and 8, vol. 12, No. 3.Applicant
• Gandhi et al., “HDI PCBs. I”, Printed Circuit Fabrication, 1999, pp 30, 32, 34, vol. 22, No. 3.Applicant
• Copeland, “Impedance Control Accuracy YPCB Measurement”, Printed Circuit Fabrication, 1999, pp 26-8, 30, vol. 22, No. 2.Applicant
• Weinhold et al., “PWB Laminations for High-Performance Applications”, Electronic Packaging and Production, 1998, pp 77-8, 80-1, vol. 38, No. 10.Applicant
• Seyfert, “Dimensional Stability Characteristics YPCB Phototools”, Printed Circuit Fabrication, 1998, pp 62-3, vol. 21, No. 7.Applicant
• Halevi et al., “Cost-Effective LDI YPCB Lithography”, Printed Circuit Fabrication, 1998, pp 30-1, vol. 21, No. 7.Applicant
• Rittichier et al., “Laser Direct Imaging: A Strategic Inflection Point YPCB Manufacture”, 1998, pp124, 1216, 128, vol. 11, No. 6.Applicant
• Ben-Ezra, “Meeting the Challenges of Direct Imaging for Cost-Effective Production YPCBs”, 1998, pp 108, 110, 112 vol. 11, No. 6.Applicant
• Atiyam “An Innovative Laser Direct Imaging System YPCB Inner Layers”, CircuiTree, 1998, pp 94, 96, 98, vol. 11, No. 6.Applicant
• Raine, “Tenting: Cost Effective Fabrication of High-Density PWBs for the Year 200 and Beyond”, Circuit World, 1998, pp 6-10, vol. 24, No. 3.Applicant
• Knudsen, “Using a New Photoimageable Dielectric for PWB Sequential Build-Up Technology”, Proceedings, The First IEEE International Symposium on Polymeric Electronics Packaging, 1997, pp 33-41.Applicant
• Heath et al., “Miocrovias Buildup PWBs: Next Generation Substrates”, SMTA National Symposium, 1997, pp 1-9.Applicant
• Brandt et al., “Ground and Power Planes for Impedance-Control and EMI Shielding in PCBs Made from Conductive TLPS Pastes”, Proceedings of the Technical Conference, 1997, pp S6/7/1-7.Applicant
• Harris, “Zero Touch-Up YPCB Photolithography”, Proceedings of the Technical Conference, 1997, pp S5/5/1-5.Applicant
• McGrath, “Multilayer PCB Manufacture Using a Permanent Photoresist—It Can Be Done”, Proceedings of the Technical Conference, 1997, pp S5/4/1-5.Applicant
• Murray, “Laser Imaging Onto Dirtect-Write Film YPCB Manufacture”, Proceedings of the Technical Conference, 1997, pp S15/4/1-4.Applicant
• Morrison, “TEA CO/sub 2/ Laser Micro Via Fabrication In Standard and Emerging PWB Dielectrics”, Proceedings of the Technical Conference, 1997, pp S15/3/1-7.Applicant
• Siddhaye, “Integration of Environmental Factors in Process Modelling for Printed Circuit Board Manufacturing. II. Fabrication”, Proceedings of the 1997 IEEE International Symposium on Electronics and the Environment, 1997, pp 226-33.Applicant
• Linn et al., “An Investigation on Artwork Image Mis-Alignment in Printed Circuit Board Manufacturing”, 6th Industrial Engineering Research Conference Proceedings, 1997, pp 696-701.Applicant
• Hu et al., “Cost Analysis for High Density Printed Wiring Board Manufacturing Processes”, IPCWorks '96 Proceedings, 1996, pp 1-5.Applicant
• Jain et al., “High-Speed, High-Resolution Ylarge-Area PCB Exposure System”, Printed Circuit Fabrication, 1997, pp 34, 36, vol. 20, No. 5.Applicant
• Murray, “Direct Write Film YPCB Phototools”, Printed Circuit Fabrication, 1997, pp 24, 26-8, vol. 20, No. 5.Applicant
• Brautigam et al., “Ultra-High Intensity Imaging YPCB, Technology”, Printed Circuit Fabrication, 1997, pp 20-2 vol. 20, No. 5.Applicant
• Chew et al., “Wastewater Recycling and Copper Recovery at a California PCB Shop”, CircuiTree, 1997, pp 132, 134, 136, 138, vol. 10, No. 5.Applicant
• Ho, “What's Up With SBU Technology? YPCB Sequential Build-Up”, Printed Circuit Fabrication, 1997, pp 64, 66, 68, vol. 20, No. 3.Applicant
• Bergman, “Relieving the Points of Pain YPCB Data Transfer”, Printed Circuit Fabrication, 1997, pp 50, 52, 54, vol. 20, No. 3.Applicant
• Singer et al., “Conventional Versus Build-Up PWB Fabrication: Cost Implications for Electronic Packaging”, Proceedings of the 1996 International Electronics Packaging Conference, 1996, pp 443-56.Applicant
• Ben-Ezra et al., “Direct Imaging Comes of Age YPCB Lithography”, CircuiTree, 1997, pp 80, 82, 86, vol. 10, No. 3.Applicant
• Miller et al., “Zero Wastewater Discharge YPCB Manufacture”, Printed Circuit Fabrication, 1996, pp 32, 34-6, vol. 19, No. 11.Applicant
• Meiler et al., “New Photoelectric for the Sequential Build-Up (SBU) of High-Density Interconnect (HDI) PWB”, Proceedings of the Printed Circuit World Convention VII, 1996, pp PO08/1-2.Applicant
• Lutschounig et al., “Buried Jumper Technology YPCBs”, Proceedings of the Printed Circuit World Convention VII, 1996, pp P16/1-11.Applicant
• Wedeking, “Tooling Data Farm YPCB CAD/CAM”, Proceedings of the Printed Circuit World Convention VII, 1996, pp P4/1-5.Applicant
• Tanizawa, “IBSS (R) Based PCB Technology for High Pin Count/Fine Pitch Package Assembly”, Proceedings of the Printed Circuit World Convention VII, 1996, pp P21/1-6.Applicant
• Ohta, “Development of DVH-ADD Printed Wiring Board for High Density MCM”, Proceedings of the Printed Circuit World Convention VII, 1996, pp P21/1-6.Applicant
• McGregor, “Effects of Copper Foil Type and Surface Preparation on Fine Line Image Transfer in Primary Imaging of Printed Wiring Boards”, Proceedings of the Printed Circuit World Convention VII, 1996, pp 17/1-20.Applicant
• Vaughan et al., “Advances in Environmentally Conscious Manufacturing Through the Use of Permanent Photoimagable Materials in PWB Fabrication”, Proceedings of the Printed Circuit World Convention VII, 1996, pp S19/3/1-5.Applicant
• Conrod et al., “PhotoDefinable Dielectric Materials for High Density Printed Wiring Board Applications”, Proceedings of the Technical Conference IPC Printed Circuits EXPO, 1996, pp S8/5/1-6.Applicant
• Nakahara et al., “Review of the Current Status of Laser Direct Imaging YPCB Manufacture”, Proceedings of the Technical Conference IPC Printed Circuits EXPO, 1996, pp S8/1/1-3.Applicant
• Aday et al., “A Comparative Analysis of High Density PWB Technologies”, Proceedings of the SPIE 1996, pp 239-44, vol. 2794.Applicant
• Holden, “Comparing Costs for Various PWB Build-Up Technologies YMCM-L”, 1996, pp 15-21, vol. 2794.Applicant
• Eickmans, “Mastertool: A New Dry Phototool in the Production of Printed Circuit Boards”, Circuit World, 1996, pp 26-32, vol. 22, No. 3.Applicant
• Crum, “Imaging Technology: Today, Tomorrow and Beyond YPCB Manufacture”, Electronic Packaging and Production, 1996, vol. 36, No. 3.Applicant
• Layden, “Is Photoplotting Finally Seeing the Light? II. YPCB Design”, Printed Circuit Designs, 1995, pp 27-8, vol. 12, No. 12.Applicant
• Ohlig, “Lighting Equipment and Fine-Line Production YPCB Lithography”, Printed Circuit Fabrication, 1996, pp 32-3, vol. 19, No. 1.Applicant
• Frauzem, “Increasing Productivity YPCB Lithography”, Printed Circuit Fabrication, 1996, pp 26-8, vol. 19, No. 1.Applicant
• Nakamura et al., “High Reliability, High Density Build Up Printed Circuit Board for MCM-L”, Proceedings 1995 International Conference on Multichip Modules (SPIE), 1995, pp 36-41, vol. 2575.Applicant
• Layden, “Is Photoplotting Finally Seeing the Light? I. YPCB Design”, Printed Circuit Design, 1995, pp 16-17.Applicant
• Yoshiki et al., “Pattern Formation of Cu Layer By Photocatalytic Reaction of ZnO Thin Film Y Printed Circuit Boards”, Journal of the Electrochemical Society, 1995, pp L235-7, vol. 142, No. 12.Applicant
• Dietz, “Fine Line Imaging (PCB Photolithography)”, Printed Circuit Fabrication, 1995, pp 32, 34, 36, vol. 18, No. 10.Applicant
• Bridges, “Fine-Line Imaging, (PCB Manufacturing)”, Printed Circuit Fabrication, 1995, pp 34, 36-8, vol. 18, No. 7.Applicant
• Schillhammer, “Rapid Multi-Layer PCB Phototyping in an Engineering Lab Environment”, Proceedings of the Technical Program. National Electronic Packaging and Production Conference, 1994, pp 49-52.Applicant
• Soules, “Dissecting Film Defects (PCB Manufacture, Imaging Contamination)”, Printed Circuit Fabrication, 1994, pp 26, 28, vol. 17, No. 12.Applicant
• Layton, “Gerber Basics: A PCB Primer—What is the Gerber Format, and Why Do I Need It?”, Printed Circuit Fabrication, 1994, pp 30-2, vol. 16, No. 7.Applicant
• Bowls et al., “Illuminating Imaging (PCB)”, Printed Circuit Fabrication, 1993, pp 40-1, vol. 16, No. 5.Applicant
• Timmons, “Imaging Large High Performance Printed Wiring Boards”, Surface Mount International Conference and Exposition, Proceedings of the Technical Program, 1992, pp 543-6, vol. 1.Applicant
• Kimura et al., “Mass-Production of PWBs With 5 Track Technology”, NEC Technical Journal, 1993, pp 77-81, vol. 45, No. 9.Applicant
• Shawhan et al., “Plated Copper Ceramic PWBs: a Versatile Metallization Technology”, Hybrid Circuit Technology, 1992, pp 28-33, vol. 8, No. 12.Applicant
• Venkata, “Industrial Fabrication of Printed Circuit Boards”, Electrical India, 1990, pp 13-1, vol. 30, No. 23.Applicant
• Rust, “Plasma cleaning of lands to improve bonding of surface mount components to printed wiring boards”, IEPS, Proceedings of the Technical Conference, 1990, pp95-109.Applicant
• Lozano, “Phototools are Developing the Future of PCBs”, Electronic Packaging and Production, 1990, pp 42-4, vol. 30, No. 12.Applicant
• No-Author, “The Production of PCBs Using Pre-Sensitized Base Material”, Revista Espanola De Electronica, 1990, pp 36-8, No. 427.Applicant
• Weinhold, “Solder-Stopping Masks for Printed Circuit Boards”, Electronik Praxis, 1990, pp 30-33, vol. 25, No. 15.Applicant
• Berry, A Fabricator's Experience with a Curtain Coatabe PILSM with SMT type PWBs, 1990, pp 731-8, vol. 1.Applicant
• Pavese et al., “The Three Dimensions made in Italy (PCBs)”, Elettronica Oggi, 1990, pp 160-72, No. 90.Applicant
• Moughin et al., “Magnetic Micropatterning of FeNi/FeMn Exchange Bias Bilayers By Ion Irradiation”, Journal of Applied Physics, 2001, pp 6606-8, vol. 89, No. 11.Applicant
• Guo et al., “Use of MicroFabricated Cold Field Emitters in Sub-100 nm Maskless Lithography”, Journal of Vacuum Science & Technology, 2001, pp 862-5, vol. 19, No. 3.Applicant
• Menon et al., “Zone-Plate-Array Lithography (ZPAL): Simulations for System Design”, AIP Conference Proceedings, 2000, pp 647-52, No. 507.Applicant
• Ishibashi et al., “Combining Atomic Force Microscopic Lithography with Photolithography”, Japanese Journal of Applied Physics, 2000, pp 7060, vol. 39, No. 12B.Applicant
• Parker et al., “A High Throughput NGL Electron Beam Direct-Write Lithography System”, Proceedings of the SPIE, 2000, pp 713-20, vol. 3997.Applicant
• Dai et al., “Lossless Layout Compression For Maskless Lithography System”, Proceedings of SPIE, 2000, pp 467-77, vol. 3997.Applicant
• Luo Xian-Gang, “Nanolithography Technology”, Wuli, 2000, pp 358-63, 350, vol. 29, No. 6.Applicant
• Parker et al., “A High Throughput Electron-Beam Direct-Write Lithography System”, Microlithography World, 2000, pp 22, 24-5, 30, vol. 9, No. 3.Applicant
• Lakner et al., “Micromirrors For Direct Writing Systems and Scanners”, Proceedings of the SPIE, 1999, pp 217-27, vol. 3878.Applicant
• Higgins et al., “Anisotropic Spinodal Dewetting as a Route to Self-Assembly of Patterned Surfaces”, Nature, 2000, pp 476-8, vol. 404, No. 6777.Applicant
• Polesello et al., “Micromachining of Silicon With a Proton Microbeam”, Nuclear Instruments & Methods in Physics Research, 1999, pp 173-8, vol. 158, No. 1-4.Applicant
• Carter et al., “Maskless, Parallel Paterning With Zone-Plate Array Lithography”, Journal of Vacuum Science & Technology, 1999, pp 3449-52, vol. 17, No. 6.Applicant
• Carter et al., “Zone-Plate Array Lithography (ZPAL): A New Maskless Approach”, Proceedings of the SPIE, 1999, pp 324-32, vol. 3676.Applicant
• Watjen et al., “On the Interpretation of Micro-PIXE Measurements on a Prototype Microstructured Reference Material”, Nuclear Instruments & Methods in Physics Research, 1999, pp 532-7, No. 1-4.Applicant
• Pueker et al., “High Resolution Phase Zone Plates for Wafer Window Wavelengths”, Proceedings of the SPIE, 1998, pp 118-28, vol. 3449.Applicant
• Groves et al., “Distributed Multiple Variable Shaped Electron Beam Column fr High Throughput Maskless Lithography”, Journal of Vacuum Sciences, 1998, pp 3168-73, vol. 16, No. 6.Applicant
• Fuller et al., “Photomask Edge Roughness Characterization Using an Atomic Force Microscope”, Proceedings of the SPIE, 1998, pp 433-40, vol. 3332.Applicant
• Descour et al., “Mass-Producible Microtags for Security Applications: Calculated Fabrication Tolerances By Rigorous Coupled-Wave Analysis”, Optical Engineering, 1998, pp 1254-61, vol. 37, No. 4.Applicant
• Avramescu et al., “Atomic Force Microscope Lithography on Carbonaceous Films Deposited by Electron-Beam Irradiation”, Applied Physics Letters, 1998, pp 716-18, vol. 72, No. 6.Applicant
• Trau et al., “Microscopic Patterning of Orientated Mesoschopic Silia Through Guided Growth”, Nature, 1997, pp 674-6, vol. 390, No. 6661.Applicant
• Descour et al., “Mass-Producible Microtags for Security Applications: Tolerance Analysis by Rigorous Coupled-Wave Analysis”, Proceedings of the SPIE, 1997, pp 15-24, vol. 3009.Applicant
• Graham et al., “Conducting Polyaniline Coatings For Submicron Lithography and SEM Technology”, Proceedings of the SPIE, 1997, pp 105-13, vol. 3048.Applicant
• Sweatt et al., “Mass-Producible Microtags”, OSA Trends in Optics and Photonics, 1996, pp 212-14, vol. 4.Applicant
• Matsuo et al., “Investigations on Reaction Mechanisms in a Surface Modification Resist Process Using Chemical Vapor Deposition of Polysiloxane”, Journal of Electrochemical Society, 1997, pp 2903-9, vol. 144, No. 8.Applicant
• No-Author, “Atom Optics”, Proceedings of the SPIE, 1997, vol. 2995.Applicant
• Biebuyck et al., “Lithography Beyond Light: Microcontact Printing with Monolayer Resists”, IBM Journal of Research and Development, 1997, pp 159-70, vol. 41, No. 1-2.Applicant
• Terris et al., “Nanoscale Replication for Scanning Probe Data Storage”, Applied Physics Letters, 1996, pp 4762-4, vol. 69, No. 27.Applicant
• Descour et al., “Mass-Producible Microscopic Computer-Generated Holograms: Microtags”, Optics Letters, 1996, pp 1951-3, vol. 21, No. 23.Applicant
• Ishikawa et al., “Nanometer-Scale Pattern Formation of GaAs by in Situ Electron-Beam Lithography Using Surface Oxide Layer as a Resist Film”, Journal of Vacuum Science, 1995, pp 2777-80, vol. 13, No. 6.Applicant
• Dz-Chi et al., “Computer Simulations For Mask Structure Heating in X-Ray Lithography”, Computers and Structures, 1996, pp 825-34, vol. 58, No. 4.Applicant
• Takechi et al., “Effects of Electron Beam Irradiation on Highly Oriented Poly (di-methyl silane) Film”, Journal of Physics D, 1995, pp 535-8, vol. 28, Mo. 3.Applicant
• Ruokamo et al., “H/sub 2/S Response of WO/sub 3/ Thin-Film Sensors Manufactured by Silicon Processing Technology”, Sensors and Actuators B (Chemical), 1994, pp 486-8, vol. B19, No. 1-3.Applicant
• Trippe et al., “Synchotron Beamless For X-Ray Lithography”, Proceedings of the SPIE, pp 314-19, vol. 2045.Applicant
• Scheckler et al., “Simulation of AZ-PN100 Resist Pattern Fluctuation in X-Ray Lithography, Including Synchotron Beam Polarization”, Japanese Journal of Applied Physics, 1993, pp 5951-9, vol. 32, No. 12B.Applicant
• Schmidt et al., “Wafer Process-Induced Distortion Study for X-Ray Technology”, Journal of Vacuum Science, 1991, pp 3237-40, vol. 9, No. 6.Applicant
• Wilkinson, “Dry Etch Damage and Its Effect on Electronic and Optical Nanostructures”, Superlattices and Microstructures, 1990, pp 381-6, vol. 7, No. 4.Applicant
• Mescheder, “Investigation of Linewidth Uniformity in X-Ray Lithography”, 1989, pp 396-40, vol. 1087.Applicant
• Shiokawa, “Microfabrication Technologies by Focused Ion Beam”, 1989, pp 274-8, vol. 55, No. 2.Applicant
• Shimazu et al., “High Speed Electron Beam Lithography”, Journal of the Japan Society of Precision Engineering, 1987, pp 1682-6, vol. 53, No. 11.Applicant
• Cullman, “Automatic Alignment System”, Voltage des 50. PTB Seminars Mikrometrologie Seminar, 1983, pp 287-92.Applicant