Method for molding a cross-linked preform

Patent Citations (75)

Non-Patent Literature (128)

• Atkinson, J. R. et al., “Silane cross-linked polyethyelene for prosthetic applications. Part I. Certain physical and mechanical properties related to the nature of the material”, Biomaterials, 4:267 (1983).Applicant
• Atkinson, J. R. et al., “Silane cross-linked polyethyelene for prosthetic applications. Part II. Creep and wear behaviour and a preliminary moulding test”, Biomaterials, 5:326 (1984).Applicant
• Bartel, D. L., et al., “The Effect of Comformity, Thickness, and Material on Stresses in Ultra-High Molecular Weight Components for Total Hip Replacement”, J. Bone & Joint Surgery, 68-A(7): 1041 (1986).Applicant
• Bhateja, S.K., “Radiation-induced Crystallinity Changes in Pressure-Crystalized Ultrahigh Molecular Weight Polyethylene”, J. Macromol. Sci. Phys., B22(1): 159 (1983).Applicant
• Bhateja, S.K., et a.l., “Radiation-induced Crystallinity Changes in Linear Polyethylene”, J. Polym. Sci. Polym. Phys. Ed. 21: 523 (1983).Applicant
• Bhateja, S.K., et al., “Radiation-induced Crystallinity Changes in Polyethylene Blends”, J. Mater. Sci., 20: 2839 (1985).Applicant
• Birkinshaw, C., et al., “The Melting Behaviour of Irradiated Polymers”, Thermochimica Acta, 117: 365 (1987).Applicant
• Bloebaum, R.D., et al., “Investigation of Early Surface Delamination Observed in Retrieved Heat-Pressed Tibiai Inserts”, Clin. Orthop., 269: 120 (1991).Applicant
• Bremmer, T., et al., “Peroxide Modification of Linear Low-Density Polyethylene: A Comparison of Dialkyl Peroxides”, J. Appl. Polym. Sci., 49: 785 (1993).Applicant
• Brown, K.J., et al., “The Wear of Ultra-High Molecular Weight Polyethylene with Reference to its Use in Prosthesis”, Plastics in Medicine & Surgery Plastics & Rubber Institute, London, 2.1 (1975).Applicant
• Chen, C.J., et al., “Radiation-induced crosslinking: II. Effect on the crystalline and amorphous densities of polyethylene”, Coll. & Polym. Sci., 269: 469 (1991).Applicant
• Chen, Y.L., et al., “Photocrosslinking of Polyethylene. I. Photoinitiators, Crosslinking Agent, and Reaction Kinetics”, J. Polym. Sci., Part A: Polym. Chem., 27: 4051 (1989).Applicant
• Chen, Y. L., et al., “Photocrossliniking of Polyethylene. II. Properties of Photocrosslinked Polyethylene”, J. Polym. Sci., Part A: Polym. Chem., 27: 4077 (1989).Applicant
• Connelly, G. M., et al., “Fatigue Crack Propagation Behavior of Ultrahigh Molecular Weight Polyethylene”, J. Orthop. Res., 2: 119 (1984).Applicant
• de Boer, A. P., et al., “Polyethylene Networks Crosslinked in Solution: Preparation, Elastic Behavior, and Oriented Crystallization. I. Crosslinking in Solution”, J. Polym. Sci., Polym. Phys. Ed., 14: 187 (1976).Applicant
• de Boer, J., et al., “Crosslinking of Ultra-High Molecular Weight Polyethylene in the Melt by Means of 2,5-dimethyl-2,5-bis(tert-butyldioxy)-3-hexyne”, Makromol. Chem., Rapid Commun., 2: 749 (1981).Applicant
• de Boer, J., et al., “Crosslinking of Ultra-High Molecular Weight Polyethylene in the Melt by Means of 2,5-dimethyl-2,5-bis(tert-butyldioxy)-3-hexyne: 2. Crystallization Behaviour and Mechanical Properties”, Polymer, 23: 1944 (1982).Applicant
• de Boer, J., et al., “Crosslinking of Ultra-High Molecular Weight Polyethylene in the Oriented State with Dicumylperoxide”, Polymer, 25: 513 (1984).Applicant
• Dijkstra, D.J., et al., “Cross-linking of ultra-high molecular weight polyethylene in the melt by means of electron beam irradiation”, Polymer, 30: 866 (1989).Applicant
• Ding, Z. Y., et al., “Model Filled Polymers. VI. Determination of the Crosslink Density of Polymeric Beads by Swelling”, J. Polym. Sci., : Part B: Polym. Phys., 29: 1035 (1991).Applicant
• Eyerer, P. et al., “Property changes of UHMW polyethylene hip cup endoprostheses during Implantation”, J. Biomed. Materials Res., 18: 1137 (1984).Applicant
• Eyerer, P., “Polyethylene”, Concise Encyclopedia of Medical & Dental Implant Materials, Pergamon Press, Oxford, 271 (1990).Applicant
• Ferris, B. D., “A quantitative study of the tissue reaction and its relationship to debris production from a joint Implant”, J. Exp. Path., 71: 367 (1990).Applicant
• Gielenz, G. et al., “Crystalline and supermolecular structures in linear polyethylene irradiated with fast electrons”, Colloid & Polymer Sci., 260: 742 (1982).Applicant
• Grobbelaar, C.J. et al., “The Radiation Improvement of Polyethylene Prosthesis”, J. Bone & Joint Surgery, 60-B(3): 370-374 (1978).Applicant
• Goodman, S., et al., “Polyethylene wear in knee arthroplasty”, Acta Orthop. Scand., 63(3): 358 (1992).Applicant
• Grood, E.S., et al., “Analysis of retrieved implants: Crystallinity changes in ultrahigh molecular weight polyethylene”, J. Biomedical Materials Res.. 16: 399 (1982).Applicant
• Huang, D.D., et al., “Cyclic Fatigue Behaviors of UHMWPE and Enhanced UHMWPE”, Trans. 38Th Ann. Mtg., Orthop. Res. Soc., p. 403 (1992).Applicant
• Kamel, I., et al., “A Model for Radiation-Induced Changes in Ultrahigh-Molecular-Weight-Polyethylene”, J. Polym. Sci. Polym. Phys. Ed., 23:2407 (1985).Applicant
• Kampouris, E.M., et al., “Benzyl Peroxide as a Crosslinking Agent for Polyethylene”, J. Appl. Polym. Sci., 34:1209 (1987).Applicant
• Kao, Y.H., “Crystallinity in chemically crosslinked low density polyethylenes: 1. Structural and fusion studies”, POLYMER, 27: 1669 (1986).Applicant
• Katq, K., et al., “Structural Changes and Melting Behavior of γ-Irradiated Polyethylene”, Japanese J. Appl. Phys., 20: 691 (1981).Applicant
• Kunert, K.A., et al., “Structural investigation of chemically crosslinked low density polyethylene”, Polymer, 22: 1355 (1981).Applicant
• Kurth, M., et al., “Effects of Radiation Sterilization on UHMW-Polyethylene”, Trans. Third World Biomaterials Congress, 589 (1988).Applicant
• Landy, M.M. et al., “Wear of Ultra-high-molecular-weight Polyethylene Components of 90 Retrieved Knee Prostheses”, J. Arthroplasty, Supplement, 3: S73 (1988).Applicant
• Lem, K., et al., “Rheological Properties of Polyethylenes Modified with Dicumyl Peroxide”, J. Appl. Polym. Sci., 27: 1367 (1982).Applicant
• Li,S., et al., “Characterization and Description of an Enhanced Ultra High Molecular Weight Polyethylene for Orthopaedic Bearing Surfaces”, Trans. 16th Ann. Soc. Biomaterials Meeting, Charleston, SC, 190 (1990).Applicant
• Manley, T.R., et al., “The effects of varying peroxide concentration in crosslinked linear polyethylene”, Polymer, 12:176 (1971).Applicant
• McKellop, H., et al., “Friction, Lubrication and Wear of Polyethylene/Metal and Polyethylene/Ceramic Hip Prostheses on a Joint Simulator”, Fourth World Biomaterials Congress, Berlin, Apr., 118 (1992).Applicant
• Minkova, L., “DSC of γ-irradiated ultra-high molecular weight polyethylene and high density polyethylene of normal molecular weight”, Colloid & Polymer Sci., 266: 6 (1988).Applicant
• Minkova, L., et al., “Blends of normal high density and ultra-high molecular weight polyethylene, γ-irradiated at a low dose”, Colloid & Polymer Sci., 268: 1018 (1990).Applicant
• Nagy, E.V., et al., “A Fourier transform infrared technique for the evaluation of polyethylene orthopaedic bearing materials”, Trans. 16Th Ann. Soc. For Biomaterials Meeting, Charleston, SC 109 (1990).Applicant
• Narkis, M., et al., “Structure and Tensile Behavior of Irradiation—and Peroxide—Crosslinked Polyethylene”, J. Macromol. Sci.—Phys., B26 (1): 37 (1987).Applicant
• Nusbaum, H. J. Et al., “The Effects of Radiation Sterilization on the Properties of Ultrahigh Molecular Weight Polyethylene”, J. Biomed. Materials Res., 13:557 (1979).Applicant
• Oonishi, H., et al., “Improvement of Polyethylene by Irradiation in Artificial Joints”, Radiat. Phys. Chem., 39: 495 (1992).Applicant
• Oonishi, H. et al., “In Vivo and In Vitro Wear Behaviour on Weightbearing Surfaces of Polyethylene Sockets Improved by Irradiation in Total Hip Prostheses”, pp. 101-115, in Surface Modification Technologies V, Sudarshan T.S. et al., ed. (The Institute of Materials, 1992).Applicant
• Painter, P.C., et al., “The Theory of Vibrational Spectroscopy and Its Application to Polymeric Materials”, John Wiley & Sons, New York, U.S.A. (1982).Applicant
• Paul, J. P., “Forces Transmitted by Joints in the Human Body”, Proc. Instn. Mech. Engrs., 181, Part 3J, Paper 8 (1966).Applicant
• Qu, B. J., et al., “Photocross-linking of Low-Density Polyethylene. I. Kinetics and Reaction Parameters”, J. Appl. Polym. Sci., 48: 701 (1993).Applicant
• Qu, B. J., et al., “Photocross-linking of Low-Density Polyethylene. II. Structure and Morphology”, J. Appl. Polym. Sci., 48:711 (1993).Applicant
• Rimnac, C.M., et al., “Chemical and Mechanical Degradation of UHMWPE: Report of the Development of an in vitro Test”, J. Appl. Biomaterials, 5:17 (1994).Applicant
• Rimnac, C.M., et al., “Observations of Surface Damage and Degradation on Retrieved PCA Knee Implants”, Trans. 38Th Ann. Orthopaedic Res. Society, Washington D.C., 330 (1992).Applicant
• Rimnac, C.M., et al., “Post-Irradiation Aging of Ultra-High Molecular Weight Polyethylene”, J. Bone & Joint Surgery, 76-A(7):1052 (1994).Applicant
• Roe, R., et al., “Effect of radiation sterilization and aging on ultrahigh molecular weight polyethylene”, J. Biomed. Mat. Res., 15:209 (1981).Applicant
• Rose, R.M., et al., “On the True Wear Rate of Ultra-High-Molecular-Weight Polyethylene in the Total Hip Prosthesis”, J. Bone & Joint Surgery, 62A(4): 537 (1980).Applicant
• Rose, R.M., et al., “Exploratory Investigations in the Structure Dependence of the Wear Resistance of Polyethylene”, Wear, 77:89 (1982).Applicant
• Rostoker, W., et al., “The Appearances of Wear on Polyethylene—A Comparison of in vivo and in vitro Wear Surfaces”, J. Biomed. Materials Res., 12:317 (1978).Applicant
• Seedhom, B.B., et al., “Wear of Solid Phase Formed High Density Polyethylene in Relation to the Life of Artificial Hips and Knees”, Wear, 24:35 (1973).Applicant
• Shen, C., et al., “The Friction and Wear Behavior of Irradiated Very High Molecular Weight Polyethylene”, Wear, 30:349 (1974).Applicant
• Shinde, A., et al., “Irradiation of Ultrahigh-Molecular-Weight Polyethylene”, J. Polym. Sci., Polym. Phys. Ed., 23:1681 (1985).Applicant
• Spruiell, J. E., et al., “Methods of Experimental Physics”, L. Marton & C. Marton, Eds., vol. 16, Part B, Academic Press, New York (1980).Applicant
• Streicher, R.M., “Ionizing irradiation for sterilization and modification of high molecular weight polyethylenes”, Plastics & Rubber Processing & Applications, 10:221 (1988).Applicant
• Streicher, R. M., “Investigation on Sterilization and Modification of High Molecular Weight Polyethylenes by Ionizing Irradiation” Beta-gamma 1/89: 34-43.Applicant
• Swanson, S.A.V., et al., Chapter 3, “Friction, Lubrication and Wear”, The Scientific Basis of Joint Replacement, Pittman Medical Publishing Co., Ltd. (1977).Applicant
• Wang, X., et al., “Melting of Ultrahigh Molecular Weight Polyethylene”, J. App. Polymer Sci., 34:593 (1987).Applicant
• Wright, T.M., et al., “The effect of carbon fiber reinforcement on contact area, contact pressure, and time-dependent deformation in polyethylene tibial components”, J. Biomed. Materials Res., 15:719 (1981).Applicant
• Zachariades, A.E., “A New Class of UHMWPE Orthopaedic Prosthetic Devices with Enhanced Mechanical Properties”, Trans. Fourth World Biomaterials Congress, Berlin 623 (1992).Applicant
• Zhao, Y., et al., “Effect of Irradiation on Crystallinity and Mechanical Properties of Ultrahigh Molecular Weight Polyethylene”, J. Appl. Polym. Sci., 50:1797 (1993).Applicant
• News You Can Use, vol. II, No. 2 (May 1996).Applicant
• “For the Tough Jobs: 1900 UHMW Polymer”, Himont Inc.(1988).Applicant
• “Abrasion-Resistant 1900 UHMW Polymer”, Hercules Inc. (1979).Applicant
• “Technical Information: 1900 Ultrahigh Molecular Weight Polymer, General Information and Applications”, Bulletin HPE-101A, Hercules U.S.A., Inc. (1989).Applicant
• “Technical Information: 1900 Ultrahigh Molecular Weight Polymer, Nuclear Radiation Effects”, Bulletin HPE-111, Himont U.S.A. Inc. (1985).Applicant
• “Techinical Information: 1900 Ultrahigh Molecular Weight Polymer, Effect of Polymer Modification”, Bulletin HPE-116, Himont U.S.A.. Inc. (1987).Applicant
• “Ultra-High Molecular Weight Polyethylene as Biomaterial in Orthopedic Surgery”, Hogrefe & Huber Publishers (1991).Applicant
• Appleby, R.W., et al., ,“Post-gamma irradiation cross-linking of polyethylene tape by acetylene treatment”, J. Material Sci. 29: 227-231 (1994).Applicant
• Higgins, J.C., et al., “Evaluation of Free Radical Reduction Treatments for UHMWPE”, Proceedings of the 42nd Annual Mtg, Orthopaedic Res. Soc., Feb. 19-22, at p. 485 (1996).Applicant
• Jasty, M., et al., “Marked Improvement in the Wear Resistance of a New Form of UHMWPE in Physiologic Hip Simulator”, Trans. 43rd Ann. Mtg, Orthopaedic Research Soc., Feb. 9-13, 1997, San Francisco, CA, p. 785.Applicant
• Jasty, M. et al., “Marked Improvement in the Wear Resistance of a New Form of UHMWPE in a Physiologic Hip Simulator”, Trans. Soc. Biomaterials, vol. XX, p. 71, 23rd Ann. Meeting Soc. for Biomaterials, Apr. 30—May 4, 1997, New Orleans, Louisiana, U.S.A., p. 157.Applicant
• Streicher, “Influence of Ionizing Irradiation in Air and Nitrogen for Sterilization of Surgical Grade Polyethylene for Implants”, Radiat. Phys. Chem., vol. 31, Nos. 4-6, pp. 693-698 (1988).Applicant
• Roe et al., “Effect of Radiation Sterilization and Aging on Ultrahigh Molecular Weight Polyethylene”, J. Biomed. Materials Res., 15: 209-230 (1981).Applicant
• Pleiss et al., “The Improvement of Polyethylene Prostheses Through Radiation Crosslinking”, Radiat. Phys. Chem., 9:647-652 (1977).Applicant
• Streicher, “The Behavior of UHMW-PE when Subjected to Sterilization by Ionizing Radiation”, Ultra-High Molecular Weight Polyethylene as Biomaterial in Orthopedic Surgery, pp. 66-73 (1990).Applicant
• Saunders, C. et al., “Raidation Effects on Microorganisms and Polymers for Medical Products,” Medical Device & Diagnostic Industry, pp. 89-92, 222 (1993).Applicant
• Kang et al., “The Radiation Chemistry of Polyethylene. IX. Temperature Coefficient of Cross-Linking and Other Effects”, J. Amer Chem Society 89 (9): 1980-1986 (1967).Applicant
• Rose et al., “Radiation Sterilization and the Wear Rate of Polyethylene”, J. Orthopaedic Res. Society, 2(4): 393-400 (1984).Applicant
• Oonishi, H. et al., Super Low Wear Cross-Linked UHMWPE by Heavy High-Dose Gamma Radiation, WPOA 2nd Congress of Hip Section, p. 61, 1996.Applicant
• Jahan et al., “Combined chemical and mechanical effects on free radicals in UHMWPE joints during implantation”, J. Biomed Material Res., 25: 1005-1016 (1991).Applicant
• Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 keV, Am Soc for Testing & Materials, Designation: E1649-94, 870-888 (1995).Applicant
• Oonishi, H. et al., “Improvement Of Polyethylene by Irradiation in Artificial Joints”, Radia Phys Chem, 39(6): 495-504 (1992).Applicant
• Oonishi, H. et al., “The Low Wear of Cross-Linked Polyethylene Socket in Total Hip Prosthees”, Encyclopedic Handbook of Biomaterials & Bioengineering, vol. 2, Marcel Dekker, Inc., 1853-1868 (1995).Applicant
• Atkinson, J., et al., “The nature of silane cross-linked HDPE is discussed. Creep and wear tests indicate its potential as a possible replacement for high molecular weight polyethylene in prosthesis”, Polymers in Medicine and Surgery, Conf. held by Plastics and Rubber Institute and Biologidal Engineering Soc., UK, Sep., 1986, P4/1-P4/9.Applicant
• Jones, W., et al., “Effect of γ Irradiation on the Friction and Wear of Ultrahigh Molecular Weight Polyethylene”, Wear 70: 77-92 (1981).Applicant
• Gent, A., et al., “Elastic Behavior, Birefringence, and Swelling of Amorphous Polyethylene Networks”, J. Polymer Sci 5: 47-60 (1967).Applicant
• Zoepfl, F., et al., “Differential Scanning Calorimetry Studies of Irradiated Polyethylene: I. Melting Temperatures and Fusion Endotherms”, J. Polymer Sci Polym. Chem. Ed. 22: 2017-2032 (1984).Applicant
• Zoepfl, F., et al., Differential Scanning Calorimetry Studies of Irradiated Polyethylene: II. The Effect of Oxygen, J. Polymer Sci Polym. Chem. Ed. 22: 2032-2045 (1984).Applicant
• Mandelkern, L., et al., Fusion of Polymer Networks Formed from Linear Polyethylene: Effect of Intermolecular Order: contribution from the General Electroc Research Laboratory and from the Polymer Structure Section, National Bureau of Standards 82: 46-53 (1960).Applicant
• Muratoglu, , O.K., et al, “A Comparison of 5 Different Types of Highly Crosslinked UHMWPES: Physical Properties and Wear Behavior”, 45th Annual Meeting, Orthopaedic Research Society, Feb. 1-4, 1999, Anaheim, California.Applicant
• Muratoglu, , O.K., et al, “A Novel Method of Crosslinking UHMWPE to Improve Wear With Little Or No Sacrifice on Mechanical Properties”, 45th Annual Meeting, Orthopaedic Research Society, Feb. 1-4, 1999, Anaheim, California.Applicant
• Muratoglu, , O.K., et al, “Electron Beam Cross-Linking of UHMWPE At Room Temperature, A Candidate Bearing Material for Total Joint Arthroplasty”, 23rd Annual Meeting of the Society for Biomaterials, Apr. 30-May 4, 1997, New Orleans, Louisana.Applicant
• Matsubara, K., et al., “The Wear Properties of High-Density Polyethylene Irradiated by Gamma Rays”, Wear, 10: 214 (1967).Applicant
• McKellop, H., et al., “Increased Wear of UHMW Polyethylene After Gamma Radiation Sterilization”, Trans. 26th Ann. ORS, Atlanta, Georgia, Feb. 5-7 (1980).Applicant
• McKellop, H., “The Effect of Radiation and Ethylene Oxide Sterilization on the Wear of UHMW Polyethylene,” 7th European Conference on Biomaterials, Sep. 8-11, 1987.Applicant
• Shen, F-S., et al., “Irraidation of Chemically Crosslinked Ultrahigh Molecular Weight Polyethylene”, J. Polymer Sci.: Part B: Polymer Phys., 34: 1063-1077 (1996).Applicant
• Oka M., et al., “Wear-Resistant Properties of Newly Improved UHMWPE”, Trans. Fifth World Biomaterials Congress, May 29-Jun. 2, 1996, Toronto, Canada, p. 520.Applicant
• Beilare, A., et al., “Deformation, Morphology and Wear Behavior of Polyethylene”, Trans. 23rd Ann. Mtg., Soc. Biomaterials, Apr. 30-May 4, 1997, New Orleans, Louisiana, p. 75.Applicant
• Clarke, I.C., et al., “Simulator Wear Study of High-Dose Gamma-Irradiated UHMWPE Cups”, Trans. 23Rd Ann. Mtg., Soc. Biomaterials, Apr. 30-May 4, 1997, New Orleans, LA, p. 71.Applicant
• Taylor, G., et al., “Stability of N2Packaged Gamma Irradiated UHMWPE”, Trans. 23rd Ann. Mtg., Soc. Biomaterials, Apr. 30-May 4, 1997, New Orleans, LA, p. 421.Applicant
• Taylor, G., et al., “Stability of N2Packaged Gamma Irradiated UHMWPE”, Trans. 43rd Ann. Mtg., Orthopaedic Res. Soc., Feb. 9-13, 1997, San Francisco, California, p. 776.Applicant
• Muratoglu, O.K., et al., “Electron Beam Cross-Linking of UHMWPE at Room Temperature, A Candidate Bearing Material for Total Joint Arthroplasty,” Trans. 23rd Ann. Mtg., Soc. Biomaterials, Apr. 30-May 4, 1997, New Orleans, LA, p. 74.Applicant
• McKellop, H. et al., “The Effect of Sterilization Method, Calcium Stearate and Molecular Weight on Wear of UHMWPE Acetabular Cups,”, Trans. 23rd Ann. Mtg., Soc. Biomaterials, Apr. 30-May 4, 1997, New Orleans, LA, p. 43.Applicant
• McKellop, H. et al., “Effect of Sterilization Method on the Wear Rate of UHMW Polyethylene Acetabular Cups in a Hip Simulator”, Trans. 43rd Ann. Mtg., Orthopaedic Res. Soc., Feb 9-13, 1997, San Francisco, California, p. 7 p. 94-16.Applicant
• McKellop, H. et al., “Wear of UHMWPE Acetabular Cups After Gamma Sterilization in Nitrogen, Thermal Stabilization and Artificial Aging”, Trans. 23rd Ann. Mtg., Soc. Biomaterials, Apr. 30-May 4, 1997, New Orleans, LA, p. 45.Applicant
• Wang, A., et al., “Effect of Raidation Dosage on the Wear of Stabilized UHMWPE Evaluated by Hip and Knee Joint Simulators”, Trans. 23rd Ann. Mtg., Soc. Biomaterials, Apr. 30-May 4, 1997, New Orleans, LA, p. 394.Applicant
• Wang, A., et al., “Wear Mechanisms and Wear Testing of Ultra-High Molecular Weight Polyethylene in Total Joint Replacements”, Hand-Out for Polyethylene Wear in Orthopaedic Implants Workshop, Trans. 23rd Ann. Mtg., Soc. Biomaterials, Apr. 30-May 4, 1997, New Orleans, LA.Applicant
• Yu, YJ., et al., “Oxidation of UHMWPE Acetabular Cups After Sterilization and Wear Testing in a Hip Joint Simulator”, Trans. 43rd Ann. Mtg., Orthopaedic Res. Soc., Feb. 9-13, 1997, San Francisco, California, LA, p. 778.Applicant
• “Effect of radiation sterilization and aging on ultrahigh molecular weight polyethylene”, R. Roe, E. Grood, R. Shastri, C.A. Gosselin, and F.R. Noyes, Journal of Biomedical Materials Research, vol. 15, 209-230 (1981).Applicant
• “Duration™ stabilised UHMWPE: an UHMWPE with Superior Wear and Oxidation Resistance; Technical Development and Scientific Evaluation”, (Cover sheet and reference page).Applicant
• Sun, Stark & Dumbleton: 20th Annual Meeting, Society for Biomaterials, Apr. 5-9, 1994, p. 121.Applicant
• Sun, Schmidig, Stark & Dumbleton: 21th Annual Meeting, Society for Biochemicals, Mar. 18-22, 1995.Applicant
• Bragdon, O'Connor, Muratoglu, Promnath, Merrill & Harris, “Advanced Mechanical Technology, Inc.”, Watertown, MA 02172; 43rd Annual Meeting, Orthopedic Research Society, Feb. 9-13, 1997, San Francisco, California.Applicant
• Premnatch, Merrill, Jasty & Harris, “Melt Irradiated UHMWPE for Total Hip Replacements; Synthesis & Properties”, Dept. of Chemical Eng., MIT Cambridge, MA 02319, 43rd Annual Meeting, Orthopedic Research Society, Feb. 9-13, 1997, San Francisco, California.Applicant
• D.C. Sun, C. Stark,, J.H. Dumbleton, “Development of an Accelerated Aging Method For Evaluation of Long-term Irradiation Effects on UHMWPE Implants”, Polymer Preprints, vol. 35, No. 2, p. 969-970, 1994.Applicant
• R.M. Streicher, “The Behavior of UHMWPE When Subjected to Sterilisation by Ionizing Radiation”, In Ultra-High Molecular Weight Polyethylene as Biomaterial in Orthopedic Surgery, Toronto: Hogrefe & Huber Publishers, 1991, p. 66-73.Applicant
• “Characterization of UHMWPE hip cups run on joint stimulators”, P. Eyerer, M. Kurth, H.A. McKellop, and T. Mittlmeier, J. Biomedical Materials Research, vol. 21, 275-291 (1987).Applicant
• “Combined chemical and mechanical effects on free radicals in UHMWPE joints during implantation”, M.S. Jahan, C. Wang, G. Schwartz, and J.A. Davidson, Journal of Biomedical Materials Research, vol. 25, pp. 1005-1017, (1991).Applicant
• “Role of cyclic plastic deformation in the wear of UHMWPE acetabular cups”, A. Wang, C. Stark, J.H. Dumbleton, Journal of Biomedical Materials Research, vol. 29, 619-626 (1995).Applicant
• “Radiation Sterilization and the Wear Rate of Polyethylene”, R.M. Rose, E.V. Goldfarb, E. Ellis, and A.N. Crugnola, “Journal of Orthopaedic Research”, Raven Press, New York ©1984, p. 393-399.Applicant