Centralized automatic energy control system

[0001] Not applicable,

[0002] Many prior arts have dealt with the thermostat improvement for air conditioning and heating systems, however, the most of them are trying to make the thermostat system more effective for individual room units. Since the advent of microprocessor and microcontroller, many microprocessor based temperature control systems have emerged for multi room facilities X such as hotels, motels and apartment buildings. The most important factor for producing a new product is the marketability in the targeted field. To that end, the product should be reliable for the objectives, economical to produce and maintain, easy to use and install (such devices as temperature control system), and durable to meet the objectives. Some prior arts have very extensive and versatile functionality but they are very complex to use, maintain, and install them. Some prior inventions are quite simple to use them but have very limited versatility.

[0003] The U.S. Pat. No. 5,682,949, describes a energy saving system for hotel and motel facilities, which connects all rooms serially by wiring them for signal or data communications. The system includes a computer for central control and operation, master nodes and local nodes for intermediate control, and slave nodes, which are thermostat. The art seems bearing following shortcomings (1) wiring to all rooms require materials and technical labor, (2) extra devices for local nodes and master nodes bears more expenses, (3) since slave nodes are connected serially, each node should have it's own address different from others and should be configured separately. When a node goes bad, an ordinary technician can not just buy one and replace it with a defected one. It should be done by somebody who knows the procedure how to configure the address of the node. (4) Only trained person can install and configure the system, not by the hotel technician or maintenance man. (5) System users, in this case front desk clerk, should go through an extensive training program to learn how to use the system including the computer. (6) On the serially connected loop of rooms, if at any point, connection is damaged or broken, the rooms connected after that point can not be controlled by the central control device. As of the U.S. Pat. No. 5,318,224, the prior art utilizes telephone communication system to remotely control a heating system, however, it's remote control functionally, according to the specification and drawings of the art, is limited only to turning on or off the heating system. It does not describe anything about the specifics on the remote-controlling device, which seems a telephone unit. To effectively control the energy usage, the prior art is employing different levels of temperature settings based on the status of a room whether the room is occupied or unoccupied. The status is determined locally by a motion detector, which monitors a movement inside the room indicating that the room is occupied. According to the specifications and drawings, the art does not seem having manual control means for the temperature limiting setting instead it has a heating time control feature. Preset temperature values 65 degrees and 45 degrees are mentioned, but those values seem loaded by the program. If a circumstance arises to change those values, the change should be done in the program, which requires time and effort. A/D converter and temperature sensor circuits can be replaced by one chip, which embeds A/D converter into a new temperature sensor, which arrangement can save space, cost, and labor time. The U.S. Pat. No. 4,552,999, titled Telephone Activation Apparatus improved the heating and air conditioning control system by adding remotely activating features to it. The feature can only turn heating/cooling system on or off, and is not much beneficial to the hotel or motel management.

[0004] The objective of the present invention is to control the energy consumption more effectively for a hotel/motel facility by adding the followings specified in the summary section.

[0005] The present invention is aimed at providing an efficient multifunctional energy control system for hotel and motel facilities where the energy expenses account for large percent of their facility operating budgets. As part of overall plans to meet the above objectives for this invention, a central controller located in the front office assumes important role to implement various controls for all rooms uniformly. By maintaining individual room's list of occupancy status whether a room is occupied or vacant, the central controller can set different level of maximum or minimum temperature setting based on them.

[0006] When a guest check out of a room, the desk clerk presses keys for the room number and OUT key on the central controller board, then following will happen: (1) an LED representing the room number is turned off, (2) the preset temperature limit number stored in the microcontroller of the central controller is downloaded into the memory of the local controller box in said room from where it controls heater or air conditioner, (3) it will also turn off the LED on the local controller box, signaling that the room is vacant.

[0007] When a maid finishes cleaning of the room and pushes the ready button of the local controller box in the room, (1) it will turn on the LED in the room and the LED representing the room on the LED Matrix Board in the central office, in green color, this signifies the room is ready to sell.

[0008] When the desk clerk checks in a guest into a room, the clerk pushes appropriate keys for the room number and pushes the In button on the central controller board, the followings will happen:

[0009] (1) Both statuses LEDS, one on the local controller box in the room and one on the LED Matrix section on the central controller in the front office turn on in red color, signing that the room is occupied.

[0010] (2) The preset limit temperature value stored in the memory of the central control board is downloaded into the memory of the local controller box in the room, which is actually controlling temperature of the room.

[0011] For all the operations described above, what the front desk clerks have to know is using keypad to select a room number and IN key or OUT key to distinguish whether the room is checked in or checked out. All the rest of the activities are performed automatically and remotely by the two microcontrollers, one on the central controller board and one on the local controller box.

[0012] If a situation arises where it is necessary to change the preset limit temperature, possibly due to the weather changes or seasonal changes, maintenance man or a manager would do this operation most likely. Whoever doing this task would just push UPDATE button on the central controller board, then type in 2 digits representing the new desired limit value for occupied status in Fahrenheit and followed by another 2 digits for vacant status. Hysteresis values are automatically calculated by the microcontroller. Those 2 values are kept in the memory of the microcontroller in the central controller board.

[0013] Whenever a room is checked in or checked out, the appropriate value is downloaded instantly into the microcontroller memory in the local controller box of the room, this downloaded preset limit value is compared with the actual ambient temperature value read by the temperature sensor device. If the difference is significant enough to exceed the hysteresis value, it will activate the appropriate heating or cooling unit to adjust the temperature toward the preset limit value.

[0014] As explained so far, the functions of the central controller are performed either by desk clerks or maintenance person.

[0015] As for the local controller, the preset limit temperature values and the room occupied status data are downloaded from the central controller. However, this invention allows guests to adjust the preset limit value with the increase and decrease button switches on the local controller box in the room. Every time the UP arrow button is pushed, the limit temperature value is incremented by one degree from the previously set value. The DOWN arrow button brings just the opposite result. When room cleaning is finished, a house-keeper or head house keeper will pushes the READY button enabling the room lighting and notifying the front office that the room is ready to sell. This procedure also changes the color of both statuses LEDS in green color.

[0016] FIG. 1 is a physical layout diagram for the central controller board in relating to a preferred embodiment of the present invention.

[0017] FIG. 2 is a functional block diagram for the central controller board located in the front office.

[0018] FIG. 3 is a physical layout diagram for the local controller box located in the each individual room.

[0019] FIG. 4 is a functional block diagram for the local controller box installed in the individual room.

[0020] FIG. 5 is an LED Matrix showing the status of rooms located on the central controller board.

[0021] FIG. 6 through FIG. 10 are for the flow charts of the software processing of the microcontroller of the central controller.

[0022] FIG. 11 through FIG. 16 are for the flow charts of the local controller.

[0023] For FIG. 6 through FIG. 16, refer to the detailed description of the preferred embodiment section.

[0024] This invention is pertaining to efficient energy management system in a hotel, motel, or apartment facilities. The main objectives are to produce a system which is easy to use, economical to adapt and operate, and having useful and necessary functions for the management of a business entity such as hotel or motel with multi room operation.

[0025] The main features of this invention are to control each room's energy (temperature and lighting) automatically from the central office location.

[0026] FIG. 1 and FIG. 2 are showing the same device in different perspectives. FIG. 1 shows the physical layout of the central controller board (2) and FIG. 2 is the functional diagram for the same device. The controller board (2) has four functional switch buttons, IN (17), OUT (14), UPDATE (16), RESET (15) switches. Providing those switch buttons, instead of using part of keypad keys, will help the operators (desk clerk and maintenance man) for easier access the switches because they are distinctively different compared with keypad keys. When the power (switch is not shown) is turned on, the controller is waiting for a functional switch button being pressed. If the IN button (17) is pressed, the CHECK IN procedure is followed.

[0027] A desk clerk types in a three digit room number, then the system automatically put the room in Occupied Status and turn on the LED (12) representing the numbered room in red color, and transmit the preset limit temperature value of the occupied status.

[0028] If the OUT button (14) is pressed, the CHECK OUT procedure is followed. The clerk type in a three digit room number, then the system automatically put the room in VACANT STATUS and turn off the LED (12), transmit the room number and the preset limit temperature value of the vacant status through the tone generator (19).

[0029] If the UPDATE button (16) is pressed, updating preset limit temperature value procedure is followed. The hotel/motel manager or maintenance person will set the new values for the preset limit temperature of the occupied status and vacant status. Those limit temperature values will be transmitted to the respective room when a guest is checked into a room. If the RESET button is pressed, it initiates the reset procedure configuring all necessary initial settings.

[0030] The key pad (11) comprises 43 12 keys which are used to input the room numbers during CHECK IN and CHECK OUT, also used to input preset limit temperature values of occupied status and vacant status during updating operation.

[0031] Display unit (13) is LCD (Liquid Crystal Display) with the associated driver circuits, normally showing Occupied Preset Limit Temperature value and Vacant Preset Limit Temperature Value, both in Fahrenheit. However, it will also display the typed room number during CECK IN and CHECK OUT operation. Soon after aforementioned operation, it will return back to the normal display showing the preset limit temperature values.

[0032] The LED Matrix (12) includes 100 LEDS (1010) for 100 room facilities as an example for this invention. This would be increased for the larger facilities and decreased for the smaller operations. Each LED represents one room showing the room's status whether it is occupied, just checked out, or cleaned and ready to sell with red color, off color or green color respectively. Red color or off color are set or cleared automatically by the desk clerk during CHECK IN or CHECK OUT operation and green color is set by the room maid or head housekeeper during the status report by pressing the READY button on the local controller box in the room.

[0033] During check in or check out procedure, the preset limit temperature stored in the either RAM or flash memory is outputted through I/O port (25) to the encoder (19) which converts digital format data to touch tone DTMF signal format. The DTMF signal is transmitted through the RJ11 connector to the local controller in the room via telephone lines. National semiconductor IC chip Th 5088 tone generator can be used for this purpose.

[0034] The tone receiver (19) circuits receives the DTMF (Double Tone Multi Frequency) tone signal from a local controller through the RJ11 connector via telephone line and convert it into digital format data. Motorolla's MC15436 IC chip can be used for this circuit.

[0035] A/D converter feature (20) is embedded into the microcontroller, it will convert any analog voltage into digital value. All the connections to the external devices will be linked through the I/O Port (25). Registers (20) are used for holding data temporarily during the manipulation of the data.

[0036] Flash memory (22) is used as data storage area semi permanently. It does not loose the contents even during the power loss, however, the contents of the memory can be changed by writing in a new data. Therefore, semi permanent data type, like limit temperature values would be stored there because those data are not changed very often.

[0037] ROM (Read Only Memory) (23) is the place where permanent data or program can be stored. The contents written in the memory can not be changed in the circuits.

[0038] RAM (Random Access Memory) (24) is the kind of memory where temporary data can be stored. However, it loses the contents whenever power is removed from the device. In a microcontroller the amount of RAM (24) memory is usually very limited, therefore programs are not stored in this type of memory. Some temporary data, such as limit temperature value or actual temperature value read by the temperature sensor, are stored in the RAM during the manipulation to get the control voltage.

[0039] When tone receiver (18) receives ringing signal, it requests interrupt to the CPU (Central Processing Unit) (27) of the microcontroller (10), the CPU (27) calls for the interrupt service routine. Which receives the incoming data and checks whether the data is a valid address, if it is so, then updates the status of the room as a clean room and turn on the LED (12) for the room with green color. At the central controller (2), 5 events, check in, check out, update, reset, and the received signal from the local controllers, requires an appropriate response from the microcontroller. First 4 events are polled continuously by the microcontroller. But the last event is initiated by the interrupt procedure, because the CPU (27) does not know when this event will occur. The CPU (27) does not pay any attention to this communication event. When a room controller is sending READY signal through tone generator, the central controller receives this signal and requests interrupt. Upon receiving this request, the CPU (27) responds and takes appropriate action, in this case, updating the room status.

[0040] FIG. 3 shows the physical layout diagram of the local controller box, (4) and FIG. 4 shows the functional diagram of the local controller (4).

[0041] Temperature sensor (31) reads ambient temperature value every so often and this value is used to compare with the preset limit value, then produces the desired control signal which will determine whether turning on or off the appropriate temperature control devices. National semiconductor, LM75 IC temperature sensor chip can be used for this purpose. AD (Analog Digital) conversion function is imbedded in the chip, and also included are temperature threshold register and hysteresis register. Those additional special functions help the design procedure much easier.

[0042] The operations of the tone generator (32A) and the tone receiver (32) are the same as that of the tone generator (19) and the tone receiver (18) of the central controller (2). The tone receiver (32) receives control signals and the preset limit temperature values via telephone lines, converts those values into digital values.

[0043] Tone generator converts digital data into DTMF format and transmits the converted data to central controller via the telephone lines. When a housekeeper finishes room cleaning and pushes READY (13) button, then the address (Room Number) and the room status data are transmitted to the central controller (2) in the front office.

[0044] This operation changes the color of the LED (40) to green from off color indicating that the room is cleaned and ready to accept a guest. HFC (34) (Heating, Fan, and Cooling) switch selects one of three functions. If central heating and cooling system is used, H Heating) and C (Cooling) positions are overridden. If individual units are used in each room, the room guests have control to select their own choice. The guest has the fan option in both situations, central system or individual room unit system.

[0045] The room guests have the control to increase or decrease room temperature from the preset limit temperature value set at the central controller. Each pressing INC (36) or DEC (35) button increases or decreases one degree to the previously set value. Thus, the preset limit temperature values are set at the central controller, then downloaded to the local controller of each individual room, then adjusted by the individual guest based on his or her own feeling of the room environment.

[0046] The display unit displays the information:

[0047] 1) Preset limit temperature value.

[0048] 2) Ambient temperature value.

[0049] The resultant output of the comparison of two values, preset limit temperature value and actual ambient temperature value is the control voltage which is amplified by the amplifier (38) and activates or deactivates relay (39) to turn on or off the heating/cooling unit. The structure of the microcontroller (30) in the local controller is the same as that of the microcontroller (10) in the central controller. Therefore, the operational characteristics for both microcontrollers are the same.

[0050] FIG. 5 is the exploded layout of the LED Matrix, which is previously explained in detail.

[0051] FIG. 6 through FIG. 10 are for the flow charts of the software processing of the microcontroller of the central controller and FIG. 11 through FIG. 16 are for that of the local controllers. FIG. 6 is for reset procedure (50), which can be invoked either by power up or pressing RESET BUTTON. The procedure initializes the internal components of the microcontroller and polls a function key press. If a function key is pressed the sequence is sent to the appropriate subroutine to take care of the function.

[0052] FIG. 7 is the check IN procedure (61). When a front clerk presses IN key, then the CPU waits and receives a room number from the keypad and sends the preset limit temperature value to the local controller and updates the status LED for the room.

[0053] FIG. 8 is the check OUT procedure (71). The operation is almost the same as check IN procedure except being initiated by the OUT button.

[0054] FIG. 9 is the UPDATE procedure (81). When the UPDATE is pressed, it waits for 2 digit input for the occupied preset limit temperature and for another 2 digits for the vacant preset limit temperature and stores them in the memory.

[0055] FIG. 10 is the interrupt service routine (90). When ring signal is received, it will initiate a hardware interrupt request, then the CPU starts the interrupt service routine receiving room number and data. According to the data received, updates the room status appropriately.

[0056] FIG. 11 through FIG. 16 are for the program flow charts for the micrcontroller of the local controller (4).

[0057] FIG. 11 is the reset procedure (100) for the microcontroller (30), the program procedure is the same as that of FIG. 6 (50).

[0058] FIG. 12 is the increment service routine (120). When a guest presses the UP arrow button on the local controller, the procedure increases one degree to the previously set value and return to the main program.

[0059] FIG. 13 is the decrement procedure (130). When a guest presses the DOWN arrow button on the local controller, the procedure decreases one degree from the previously set value and return to the main program.

[0060] FIG. 14 is the transfer procedure (140). When a room attendant presses the READY button, the program sends out the room number and READY status data, to the central controller and updates to the ROOM IS READY status, setting the LED to the green color. FIG.15 is the control type subroutine (150). The procedure is polling HEAT, FAN, COOL positions of the HFC button. Depending upon the button's position, it will set the appropriate flag bit for the position.

[0061] FIG. 16 is the interrupt service routine. The service routine receives appropriate preset limit temperature and updates the room status.